Nokta Impakt software update

Software update (02.05.2017)

Download the new version of the software, it is in zip format and the size is 28 MB: R1_V1.13_V1.11
Update V1.11 brings improvements to the frequency shift function. The individual frequency shifts, have been assigned to individual operating frequencies (5kHz, 14kHz, 20 kHz) and the whole function has been improved.

Installation Guide

If the Windows security warning appears during installation, press the "Yes" button and continue.

Download the ".zip" file to your desktop.

Extract the ".zip" files to the desktop and double click on the extracted folder.

Run the installation file.

Press "Next" to install.

Press "Next" again.

Press the "Next" button again to confirm.

Press the "Close" button to exit.

The "Nokta Detector Update Tool" icon will appear on the desktop.

After running the "Nokta Detector Update Tool" for the first time, you need to click "OK". For subsequent runs, you can skip this screen by clicking "Cancel".

Click "Extract" on the Driver Installation Wizard screen.

Press the "Next" button.

Select "I agree to this agreement" and press the "Next" button.

The installation will proceed.

Click Finish to complete.

Click the "OK" button.

Click "Select File" and select the "bin" file in the extracted folder.

Double click on the ".bin" file.

Remove the batteries and connect one end of the USB cable to the detector and the other end to the computer. Wait 15 seconds while the drivers are installed on the operating system.

Click the "Detect Device" button to connect the detector to the application. If the pairing is successful, the "Detection successful" screen will appear. Press the "OK" button to exit.

Click the "Start Update" button.

Wait until the progress bar is 100% full.

Click the OK button in the Update Complete window.

Disconnect the cable and turn on the detector