• Archive of articles
• Metal Detectors - Reviews and Tests
• Minelab – tests and reviews
• Minelab Equinox 800 and 600 metal detector

Minelab Equinox 800 and 600 metal detector

Subcategories

Equinox to the bolt - single or double mode

In another episode of Equinox to the Bolt, we covered the differences between the single and double modes.

Snorkeling in Croatia with Equinox 600 and Nokta Pulse Dive

Swimsuit gowns, the sound of the sea, beer and relaxation... Finally summer! That's probably what a lot of us think about when we plan our holidays. This year, like the last, has been marred by a pesky pandemic, and so many of us are looking forward to finally relaxing and thinking different thoughts. After all, it's by the sea that things work best. Especially when you have the chance to earn a gold ring...

How to replace the battery in Equinox

Since we have a proliferation of "fake news", it was necessary to show the reality on video.

Beachtest of separation specials - 10x5 "coilts and 6" Minelab for Eqiunox

If separation is required, you should avoid choosing one of these two probes.Although the separation can be affected a bit by setting the speed, but from my own experience and after a few tests I know that the separation is about 70-80% given by the shape and size of the probe.

New Coiltek coils for Minelab Equinox - first taste

Yesterday afternoon all three test coils for the Equinox from Coiltek arrived. Petr couldn't resist and recorded at least the first first taste.

Equinox to Screw 5 - Multifrequency

Thanks to the winter weather keeping us warm in the workshop, you can watch another Equinox video to the bolt. This time dedicated to multi-frequency technology.

Metal detector Minelab Equinox to screw 4 - pairs with phone

I'm sure you know, you go looking, but you just can't turn your phone off that day. So today we're going to show you a little trick to keep you from constantly taking off your gloves and digging for your phone with your hands in the dirt.

Minelab Equinox - down to the last screw, part 3

Since there was quite a big discussion around the first part, which is good, we decided to put in the third part some more interesting experiments about the dependence of ID number on material and area.

Minelab Equinox - down to the last screw, part 2

In today's episode we will look at the basic keypad layout and especially how to set the tone response of the detector to your individual requirements.

Minelab Equinox - down to the last screw, part 1

If you want to get the most out of your detector , it can only be done if you know how it works inside. That's why, starting today, we've prepared a little series where we're going to break down the features of Multi IQ technology down to the last detail

↑ Back to top + See more